(C5H6N)4[Be6(HPO3)8]·H2O: A low-density open-framework beryllium phosphite with multidirectional 12-ring channels

Employing the common pyridine (=py) solvent as the source of structure-directing agents (SDAs), a novel three-dimensional open-framework beryllium phosphite (Hpy)₄[Be₆(HPO₃)₈]·H₂O (1), has been solvothermally synthesized and structurally characterized by IR, elemental analysis, thermogravimetric analysis, powder and single-crystal X-ray diffractions. It crystallizes in the orthorhombic system, space group Pbca (No. 61), a = 20.0034(4) Å, b = 20.2188(4) Å, c = 20.9731(3) Å, V = 8482.5(3) Å³, and Z = 8. The alternating connection of BeO₄ tetrahedra and HPO₃ pseudopyramids give rise to a (3, 4)-connected network with multidirectional intersecting 12-ring channels. The compound possesses a low density and a new {4.8.10}{4².6.8.10.12}{4².6}₃{4².8.10².12}{4³.6².8} topology.     

Depolymerization of Free‐Radical Polymers with Spin Migrations

The mechanism of depolymerization is one of the most essential issues in chemical engineering and materials science. In this work, we investigate the depolymerization reactions of three typical free‐radical poly(alpha‐methylstyrene) tetramers by using first‐principles density functional theory. The calculated results show that these reactions all need to overcome the energy barriers in the range of 0.58 to 0.77 eV, and that breaking the C?C bond at the chain end leads to the dissociation of alpha‐methylstyrene monomers from the polymers. Electronic‐structure analysis indicates that the reactions occur easily at the CR₃ unsaturated end, and that the frontier molecular orbitals that participate in the reactions are mainly localized at the unsaturated ends. Meanwhile, spin population analysis presents the unique net spin‐transfer process in free‐radical depolymerization reactions. We hope the current findings can contribute to understanding the free‐radical depolymerization mechanism and help guide future experiments.     

Identification of antibacterial and antioxidant constituents of the essential oils of Cynanchum chinense and Ligustrum compactum

The aim of this research was to determine the chemical composition, antioxidant and antibacterial properties of the essential oils from Cynanchum chinense and Ligustrum compactum and isolation of antioxidant and antibacterial constituents from the essential oils. Thirty-eight components were identified in essential oils. Based on bioactivity-guided fractionation, guaiacol, linalool and 2-phenylethanol were isolated and identified as active constituents. Both L. compactum flower oil and 2-phenylethanol showed high antibacterial performance, with inhibition zone from 22.8 ± 0.8 to 11.9 ± 2.0 mm at highest concentration, and minimum inhibitory concentration values ranging from 0.25% to 1%. In both DPPH and ABTS assay, the active constituent guaiacol (IC₅₀ = 4.15 ± 0.72 and 9.12 ± 0.98 μg mL^? 1, respectively) exhibited high antioxidant activity, and the oils showed moderate antioxidant activity. These results indicate potential efficacy of active constituents and essential oils of L. compactum and C. chinense to control food-borne pathogenic and spoilage bacteria.     

Theoretical and experimental research on the self‐assembled system of molecularly imprinted polymers formed by salbutamol and methacrylic acid

The quantum chemical method was applied for screening functional monomers in the rational design of salbutamol‐imprinted polymers. Salbutamol was the template molecule, and methacrylic acid was the single functional monomer. The LC‐WPBE/6–31G(d,p) method was used to investigate the geometry optimization, active sites, natural bond orbital charges, binding energies of the imprinted molecule, and solvation energy. The mechanism of action between salbutamol and methacrylic acid was also discussed. The theoretical results show that salbutamol interacts with functional monomers by hydrogen bonds, and the salbutamol‐imprinted polymers with a ratio of 1:4 (salbutamol/methacrylic acid) in acetonitrile had the highest stability. The salbutamol‐imprinted polymers were prepared by precipitation polymerization. The experimental results indicated that the maximum adsorption capacity for salbutamol toward molecularly imprinted polymers was 7.33 mg/g, and the molecularly imprinted polymers had a higher selectivity for salbutamol than for norepinephrine and terbutaline sulfate. Herein, the studies can provide theoretical and experimental references for the salbutamol molecular imprinted system.     

Separation and concentration of sulfonylurea herbicides in milk by ionic‐liquid‐based foam flotation solid‐phase extraction

The ultrasound‐assisted ionic liquid foam flotation solid‐phase extraction of sulfonylurea herbicides in milk was developed and validated. The proteins and lipids were isolated from the sample matrix by adding salt and adjusting the pH value. The target analytes eluted from the solid‐phase extraction cartridge were determined by high‐performance liquid chromatography. Some experimental parameters, including the pH value of sample solution, amount of NaCl, ionic liquid type, extraction time, flow rate of carrier gas, flotation time, and solid‐phase extraction cartridge type were investigated and optimized. Under the optimized experimental conditions, the limits of detection for metsulfuron, pyrazosulfuron, chlorimuron‐ethyl, and nicosulfuron were 1.3, 0.6, 0.7, and 1.1 μg/L, respectively. When the present method was applied to the analysis of milk samples the recoveries of the analytes ranged from 84.3 to 105.2% and relative standard deviations were >5.7%.     

Ionic liquid and aqueous two‐phase extraction based on salting‐out coupled with high‐performance liquid chromatography for the determination of seven rare ginsenosides in Xue‐Sai‐Tong injection

A method of ionic liquid salt aqueous two‐phase extraction coupled with high‐performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg₆, F₄, 20(S)‐Rg₃, 20(R)‐Rg₃, Rk₃, Rk₁, and Rg₅ in Xue‐Sai‐Tong injection. The injection was mixed with ionic liquid 1‐butyl‐3‐methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two‐phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue‐Sai‐Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.     

Preparation of a monolith functionalized with zinc oxide nanoparticles and its application in the enrichment of fluoroquinolone antibiotics

This study describes the enrichment ability of ZnO‐modified methacrylic acid‐co‐ethylene dimethacrylate polymer monoliths as stationary phases for the simultaneous determination of antibiotics (ofloxacin, ciprofloxacin, enoxacin, and pefloxacin) combined with high‐performance liquid chromatography. The prepared monolith was characterized by scanning electron microscopy, X‐ray photoelectron spectroscopy, Fourier‐transformed infrared spectroscopy, and thermogravimetric analysis. The polymer monolith microextraction method has been applied to the enrichment of fluoroquinolone antibiotics and satisfactory results were obtained in the analysis of water samples. Compared with the conventional methacrylic acid based monolith, the developed monolith exhibited a higher enrichment capacity because of the introduction of zinc oxide into the preparation process.     

A Nanoscale Multiresponsive Luminescent Sensor Based on a Terbium(III) Metal–Organic Framework

A nanoscale terbium‐containing metal–organic framework ( nTbL ), with a layer‐like structure and [H₂NMe₂]⁺ cations located in the framework channels, was synthesized under hydrothermal conditions. The structure of the as‐prepared sample was systematically confirmed by powder XRD and elemental analysis; the morphology was characterized by field‐emission SEM and TEM. The photoluminescence studies revealed that rod‐like nTbL exhibited bright‐green emission, corresponding to ⁵D₄→⁷F_J (J=6–3) transitions of the Tb³⁺ ion under excitation. Further sensing measurements revealed that as‐prepared nTbL could be utilized as a multiresponsive luminescent sensor, which showed significant and exclusive detection ability for Fe³⁺ ions and phenylmethanol. These results highlight the practical applications of lanthanide‐containing metal–organic frameworks as fluorescent probes.     

Luminescent Nanofibers Fabricated from Phenanthroimidazole Derivatives by Organogelation: Fluorescence Response towards Acid with High Performance

Nanofibers based on phenanthroimidazole derivatives PCC , PDC , and PSC were fabricated by organogelation processes, and their fluorescence sensory properties towards acid were investigated. It was found that the emission of PCC in the nanofiber‐based film could be quenched significantly upon exposure to gaseous TFA due to the formation of protonated PCC , in which ICT (intramolecular charge transfer) would occur. On the other hand, TFA vapor led to the emitting colors of PDC and PSC in the nanofiber‐based films to turn to yellow and green from sky blue and blue, respectively. Additionally, we found that the decay times of PCC were 0.1 s and 1.9 s in probing the saturated vapor of TFA in nanofiber‐based film and in spin‐coated film, respectively. The results suggested that the high surface‐to‐volume ratio and large interspace in the nanofiber‐based networks favored the enhanced adsorption, accumulation, and diffusion of gaseous molecules, resulting in such a high performance.